Stereo pojačalo NAD C 379

Utvjelovljujuci pola stoljeca audio strucnosti, NAD C 379 je sve što biste ocekivali od pojacala iz Classic Series serije. Nastavljajuci NAD-ovu tradiciju isporuke jednostavnosti, vrijednosti i inovacije, C 379 sadrži najnoviju generaciju MDC tehnologije, 80 vata po kanalu HybridDigital® UcD pojacanja, te visokoucinkoviti ESS SABRE DAC koji vam omogucuje da doživite glazbu s iznimnim zvucnim detaljima i jasnocom.

Svaki detalj dizajna pojacala C 379 je doraden za maksimalne performanse. Pocevši od prilagodene verzije dokazane HybridDigital UcD izlazne faze, C 379 radi u potpuno balansiranoj mostnoj konfiguraciji. To omogucuje ogromnu snagu uz gotovo neprimjetne izoblicenja i šum u cujnom rasponu. Napajanje može kontinuirano isporuciti 80 vata, a trenutna snaga prelazi 120 vata za kratkotrajne glazbene prijelaze. Za još vecu snagu, C 379 se može mostiti u mono s pojacalom C 268, pružajuci do 300 vata po kanalu zvuka bez izoblicenja.


Specifikacije
PREAMPLIFIER SECTION
LINE INPUT, PRE-OUT (ANALOG BYPASS ON) DATA COLUMN
THD (20Hz - 20kHz) <0.002 % at 2 V out
Signal-to-Noise Ratio >106dB (IHF; A-weighted, ref. 500 mV out, unity gain)
Channel separation >100dB (1 kHz); >90 dB (10 kHz)
Input Impedance (R and C) 56 kohms + 100 pF
Maximum input signal >4.6 Vrms (ref. 0.1 % THD)
Output impedance Source Z + 320 ohms
Input sensitivity 65mV (ref. 500 mV out, Volume maximum)
Frequency response ±0.3 dB (20 Hz – 20 kHz)
Maximum voltage output -IHF load >>5 V (ref. 0.1 % THD)

PHONO INPUT, PRE-OUT (ANALOG BYPASS ON)
THD (20Hz - 20kHz) <0.01% at 2 V out
Signal-to-Noise Ratio >84dB (200 ohms source; A-weighted, ref. 500 mV out)
Input sensitivity 46 kohms/100 pF
Frequency response ±0.3 dB (20 Hz – 20 kHz)
Maximum input signal at 1kHz >80 mVrms (ref. 0.1 % THD)

LINE INPUT, HEADPHONE OUT (ANALOG BYPASS ON)
THD (20Hz - 20kHz) <0.005% at 1V out
Signal-to-Noise Ratio >107 dB (32 ohms loads; A-WTD, ref. 1V out, unity gain
Frequency response ±0.3 dB (20 Hz – 20 kHz)
Channel separation >62 dB at 1kHz
Output impedance 2.2 Ohms

LINE IN, SPEAKER OUT (ANALOG BYPASS ON)
Continuous output power into 8 ohms and 4 ohms 2 x 80W
THD (20 Hz – 20 kHz) <0.03 % (250 mW to 80 W, 8 Ohms and 4 Ohms)
Signal-to-Noise Ratio >95 dB (A-weighted, 500 mV input, ref. 1 W out in 8 ohms)
Clipping power 150W
IHF dynamic power 120W into 8 ohms
200W into 4 ohms
250W into 2 ohms
Peak output current >26A (in 1 ohm, 1ms)
Damping factor >100 (ref. 8 ohms 20 Hz – 20 kHz)
Frequency response ±0.3 dB (20 Hz – 20 kHz)
Channel separation >90dB (1 kHz)
>75dB (10 kHz)
Input sensitivity (for 80 W in 8 ohms) 750mV/50kohms

GENERAL SPECIFICATIONS
Supports bit rate/sample rate up to 32 bit/384 kHz
Frequency band 2.402GHz- 2.480GHz
Maximum transmit power (dBm) 7 dBm ± 2 dBm

DIMENSIONS AND WEIGHT
Gross dimensions (W x H x D) 435 x 100 x 390mm (17.1 x 3.9 x 15.4“)
Net Weight 8.7kg (19.1lb)
Shipping weight ~11kg (24.2lb)