Uljni radijator MILL (bijeli, čelik, 1500 W, AB-H1500DN)

"Heating with style"

Mill oil radiator 1500w with Heat Boost Technology
If you are looking for something that can aesthetically enliven your home and at the same time offer a warm feeling in the winter then you need a new generation of Mill oil radiators! Mill is an innovative oil radiator with the latest technology, which, along with its elegant design, will provide a stunning look to your home.

How Mill Boost Technology Works
Due to its shape, the Mill oil radiator has a closed structure around the ribs, which release heat. This makes a big difference in terms of providing heat. The design of the heater itself forces the hot air to rise vertically through the hot ribs. This increases the speed of hot air, which is reflected in significantly faster and more efficient heat distribution in the room.

DAY / NIGHT program
Mill has developed a program that allows you to reduce the temperature when you are not at home. The day / night program allows you to set the operating time and thus reduce energy consumption by up to 25%. With easy programming, you will easily control the heating at all times.

Technical specifications:

• 1500W
• Mill Heat Boost Technology
• Aesthetically finished shape
• "Tip-over" switch (radiator shuts off if it overturns)
• Electronic thermostat: YES
• Easy to use with ON / OFF button
• Aluminum base for an extra sense of quality
• 3 Heating power setting options: 600W / 900W / 1500W
• Color: Mill white
• Size: 26.8 * 15.0 * 65.6 cm (Width * Depth * Height)

Buying instructions:

Room size
You will need to measure the size of the room, ie. floor area in square meters and ceiling height before deciding which model you need. If the space is too large, you may need more heaters to distribute the heat evenly between each source. In mild climates, use approx. 60-70 watts per square meter for calculation purposes and 70-85 watts per square meter for colder climates.

A well-insulated house?
The age and insulation of your home will also affect your heating needs. Less watts per square meter are needed for newer homes and homes with an influx of heat, while older and less well-insulated homes will need relatively more watts per square meter.

Avoid the thermal bridge
Although modern windows are impermeable, they are not usually insulated as well as walls. The air in them will cool quickly and sink towards the ground. This is called a thermal bridge, and can be avoided by installing a suitable radiator under each window.

Go for more watts than you need
Once you figure out how many watts you need, avoid buying a heater that just fits your needs. Buy such a product that gives you a little extra capacity so you don’t have to work at full power. The surface temperature of the heater will therefore be suitably lower.

• Frequently Asked Questions (FAQ)