Ljepljivi premaz za 3D printer DEVIL DESIGN, 110ml
Ljepljivi premaz za 3D printer DEVIL DESIGN, 110ml
16,50 €
Dobavljivo
Ronis Čakovec - Galerija sjever
Ronis Zagreb - Velesajam
Ronis Varaždin - skladište
Ronis Zagreb - Velesajam
Očekivana isporuka do 28.10.2026.
Točniju potvrdu roka i dostupnost javit ćemo ubrzo po narudžbi.
Informacije o raspoloživosti i vremenu isporuke su indikativne, ažuriraju se u intervalima i podložne su promjenama, te ne čine obvezujuću ponudu. Potvrdu dostupnosti i cijene ćemo vam dostaviti nakon što primimo i obradimo vašu narudžbu. Ugovor o kupnji je sklopljen tek po izdavanju računa.
EAN: 5902280031932
Više o proizvodu
Adhesive coating is a transparent adhesive in the form of a liquid substance, which serves to increase the adhesion of the printout to the table of 3D printers.
It is designed for ABS, ASA, HIPS, PLA, PET-G, TPU materials. For use on glass or aluminium tables.
Application
Apply a thin layer of adhesive to the printers COLD table.
Warm the table to the correct working temperature.
Wait for the adhesive to dry, about 2 to 3 minutes.
After 3D printing is complete, wait until the table and the printout has cooled down to room temperature.
The printed object should be carefully undermined with a spatula.
Suggested working temperatures
MaterialTable temperature
ABSFrom 90°C to 100°C
ASAFrom 90°C to 100°C
HIPSFrom 90°C to 100°C
PLAFrom 50°C to 60°C
PET-GFrom 70°C to 80°C
TPUFrom 20°C to 80°C
Adhesive coating specification
ParameterScope
ColourClear
Designed for materialsABS, ACE, HIPS, PLA, PET-G, TPU
ApplicationGlass / aluminium
Water washableYes
ConsistencySticky
The scentVanilla
State of aggregationLiquid
Packaging dimensions36 x 36 x 167 mm
Capacity110 ml
It is designed for ABS, ASA, HIPS, PLA, PET-G, TPU materials. For use on glass or aluminium tables.
Application
Apply a thin layer of adhesive to the printers COLD table.
Warm the table to the correct working temperature.
Wait for the adhesive to dry, about 2 to 3 minutes.
After 3D printing is complete, wait until the table and the printout has cooled down to room temperature.
The printed object should be carefully undermined with a spatula.
Suggested working temperatures
Material
ABS
ASA
HIPS
PLA
PET-G
TPU
Adhesive coating specification
Parameter
Colour
Designed for materials
Application
Water washable
Consistency
The scent
State of aggregation
Packaging dimensions
Capacity
Pogledajte slične artikle
Filament za 3D printer DEVIL DESIGN PLA 1.75mm (1kg), žuta boja
Dobavljivo
Materijal PLA, promjer 1. 75 mm, masa 1 kg, boja žuta
————
Visokokvalitetni PLA filament za pouzdane i precizne 3D ispise sjajne površine. Idealan za izradu prototipova, modela i ukrasnih predmeta.
22,00 €
Očekivana isporuka do 28.10.2026.
Informacije o raspoloživosti i vremenu isporuke su indikativne, ažuriraju se u intervalima i podložne su promjenama, te ne čine obvezujuću ponudu. Potvrdu dostupnosti i cijene ćemo vam dostaviti nakon što primimo i obradimo vašu narudžbu. Ugovor o kupnji je sklopljen tek po izdavanju računa.
-3% dodatnog popusta
= 21,34€ uz plaćanje odjednom (osim Diners i PayPal)
= 21,34€ uz plaćanje odjednom (osim Diners i PayPal)