The Dreame X60 Pro Ultra Complete represents a new generation of robotic cleaning, designed for users who want to combine exceptional suction power, thorough wet cleaning, advanced navigation, and minimal manual maintenance. It is one of Dreame’s most technologically advanced robot vacuums, which, in addition to cleaning open areas, pays special attention to areas where traditional robot vacuums struggle the most—edges, corners, the space under low furniture, thresholds, and different floor levels.

The combination of 42,000 Pa of Vormax suction power, the HyperStream Detangling DuoBrush 2.0 dual-main-brush system, advanced floor mopping, and an intelligent environment-sensing system enables effective cleaning of hard floors and carpets.

Once cleaning is complete, the multifunctional dock takes care of most maintenance tasks. The robot automatically empties the dust bin, washes the mop pads with hot water, dries them, refills the internal water tank, and dispenses cleaning solution as needed.

Exceptional suction power of 42,000 Pa

The Dreame X60 Pro Ultra Complete achieves a maximum suction power of 42,000 Pa, effectively removing both fine dust and larger dirt particles.

This high suction power is particularly effective on carpets, when cleaning the gaps between floor coverings, and in households with pets, where hair, crumbs, and other stubborn dirt.

The robot adjusts its cleaning mode based on the type of surface and the detected dirt, so the high suction power isn’t just meant to achieve an impressive number—it’s integrated into a comprehensive, intelligent home cleaning system.

HyperStream Detangling DuoBrush 2.0 – Less Hair and Fur Tangling

The advanced HyperStream Detangling DuoBrush 2.0 system handles dirt pickup.

The dual main brush is designed to improve floor contact while reducing tangles of human and pet hair around the brush. This means less manual hair removal and easier routine maintenance of the vacuum cleaner.

The system is particularly useful in households with long hair or pets, where tangled hair around the main brush is one of the most common problems with robotic vacuums.

The main brush can also be raised, allowing the robot to adapt its operation to different cleaning modes.

The extendable side brush reaches even further

Due to their shape, classic round robot vacuums have a harder time reaching all the way to the edge of a room or deep into corners. The Dreame X60 Pro Ultra Complete solves this problem with an advanced extendable side brush system.

The side brush can extend up to 12 cm, allowing it to reach deeper into corners, along baseboards, around furniture legs, and into other hard-to-reach areas.

This way, the robot doesn’t just clean the center of the room—it actively adapts its cleaning system to the area it’s currently cleaning.

The mop extends up to 18 cm

The wet cleaning system uses a similar principle.

The Dreame X60 Pro Ultra Complete uses two rotating Omni-Scrub mops, and the floor-cleaning system can extend up to 18 cm.

This allows the mop to reach right up to the edges of the room and into areas that are out of reach of the robot’s round body when the mops are in their normal position.

The result is a more evenly cleaned surface and significantly fewer uncleaned areas along walls, furniture, and in hard-to-reach corners of the room.

Advanced wet cleaning for stubborn stains

The Dreame X60 Pro Ultra Complete isn’t just designed for lightly mopping the floor with a wet mop.

The dual rotating mops create a mechanical action on the surface that helps remove dried-on stains, dirt streaks, and other debris.

The robot can detect dirt and adjust the cleaning process accordingly. It also supports additional mop rinsing and re-cleaning of an area when necessary.

The mops can be raised by 10.5 mm, which helps with transitions between different types of surfaces and reduces contact between the wet mops and carpets.

If necessary, the robot can also automatically return the mops to the station.

Mop washing with hot water up to 100 °C

An important part of the system is the advanced multifunctional base station.

After mopping, the robot returns to the station, where the mop pads are automatically washed with hot water. During the self-cleaning process, the system can reach temperatures of up to 100 °C, which improves the removal of grease, dirt, and residue from the mop surfaces.

This is particularly useful when cleaning kitchens, dining rooms, and other areas where greasy or more stubborn stains often appear on the floor.

Drying Mops with Warm Air

After washing, the mop cloths are automatically dried with warm air.

Drying helps reduce moisture retention in the cloths and, consequently, the development of unpleasant odors that can occur if wet cloths are left in a closed space for an extended period of time.

This means the user does not have to remove and manually dry the cloths after each cleaning session.

AceClean DryBoard – a station that takes care of itself

Dreame has also paid special attention to the area where mops are washed.

The AceClean DryBoard system reduces the amount of manual cleaning required for the washing section of the base station and helps keep the mop-washing area cleaner.

Thus, automation covers not only cleaning the home but also a large part of the maintenance of the robotic system itself.

Automatic dust bin emptying

After vacuuming is complete, the robot automatically transfers the contents of its dust bin to a large dust bag in the base station.

The bag in the docking station has a capacity of 3.2 liters, so the user does not have to empty the small dustbin in the robot after every cleaning session.

Under optimal conditions, Dreame states that the robot can operate for an extended period without needing to replace the bag; however, the actual interval depends on the size of the home, cleaning frequency, dust volume, and the presence of pets.

Automatic Cleaning Solution Dispensing

The charging station can automatically dispense the appropriate amount of cleaning solution.

This means the user does not have to prepare a mixture of water and cleaning solution before each cleaning session. The system handles the dispensing as part of the automated cycle.

The station features a large 4.2-liter clean water tank and a 3.0-liter dirty water tank, allowing for multiple consecutive wash cycles with less frequent manual refilling or emptying.

AI OmniSight 3.0 for Intelligent Environment Detection

The Dreame X60 Pro Ultra Complete uses the advanced AI OmniSight 3.0 system for navigation and obstacle avoidance.

The system combines two AI cameras, 3D structured light, LED lighting, and advanced sensors, which the robot uses to monitor its surroundings, detect objects, and plan its path through the room.

This is especially important in a real home, where the floor isn’t always completely clear. Shoes, cables, toys, chair legs, small objects, and other obstacles may be in the way.

The robot adjusts its path on the fly and tries to clean the space as efficiently as possible without unnecessary collisions.

Proactive Dirt Detection

The advanced sensor system isn’t just for navigation.

The robot can also detect dirtier areas and adjust its cleaning accordingly. Instead of cleaning the entire space in the same way, it can devote extra attention to the more challenging parts of the floor.

This enables a more intelligent approach, as the robot doesn’t just follow a predetermined path but responds to the actual conditions in the room.

VersaLift DToF – Low Profile for Cleaning Under Furniture

One of the most notable features of the X60 Pro Ultra Complete model is the versatile VersaLift DToF system.

When the navigation sensor is raised, the robot is approximately 111 mm tall. When a lower profile is needed to clean under furniture, the sensor can retract into the housing, reducing the robot’s total height to just 89 mm.

This allows it to access areas under certain beds, sofas, cabinets, and other low-profile furniture—places where taller robot vacuums with a standard navigation mast often cannot reach.

Overcoming obstacles up to 10 cm

The X60 Pro Ultra Complete is particularly appealing for homes with more challenging transitions between rooms.

The robot can overcome single obstacles or thresholds up to 5.2 cm high, and with a properly designed two-step obstacle, a total height of up to 10 cm.

This is significantly more than many standard robot vacuums and allows for greater autonomy in apartments or houses with higher thresholds, passageways, or different floor levels.

Of course, the actual ability to navigate over obstacles also depends on the shape, width, and material of the obstacle.

PowerMaster for Large Areas

The robot uses a 5,000 mAh battery and the PowerMaster fast-charging system with a current of up to 11 A.

Dreame designed the system specifically for larger living spaces. If the battery runs out during cleaning, the robot returns to the charging station, quickly recharges, and then resumes cleaning where it left off.

Under laboratory conditions, approximately 5.5 minutes of fast charging can restore up to 24% of the battery’s capacity, allowing for shorter interruptions during longer cleaning cycles.

The longest declared runtime for vacuuming is up to 242 minutes, and up to 135 minutes for combined vacuuming and mopping, depending on the selected settings and conditions of use.

Advanced Control via the App

You can control the Dreame X60 Pro Ultra Complete via the app, which offers detailed cleaning settings and a map of your home.

Users can specify rooms and cleaning areas, adjust suction power and mopping intensity, set schedules, define no-go zones, and choose the cleaning mode for individual rooms.

The system also supports voice control and integration with compatible platforms such as Amazon Alexa, Google Assistant, and Siri.

Designed to minimize manual labor

The main advantage of the Dreame X60 Pro Ultra Complete isn’t a single feature, but rather the way its many features are integrated into a single automated system.

The robot:

• navigates the room autonomously,
• detects and avoids numerous obstacles,
• suctions with a power of up to 42,000 Pa,
• actively cleans edges and corners,
• washes the floor with rotating mops,
• adjusts cleaning based on detected dirt,
• climbs higher thresholds,
• automatically empties the dust bin,
• washes the mop with hot water,
• dries the mop with warm air,
• automatically dispenses cleaning solution,
• refills the robot with water,
• and automatically recharges.

The result is a system that can perform most daily floor maintenance tasks without direct user intervention.

Complete Version with Additional Accessories

The “Complete” designation means that the robot comes with an expanded set of replacement consumables.

In addition to the base robot and charging station, the set includes extra brushes, filters, dust bags, mop pads, and cleaning solution, so the user is equipped with a supply of the most commonly used accessories right from the start.

This is especially convenient for more intensive use of the robot, as there is no need to purchase replacement supplies immediately after purchase.

Technical Specifications