Dreame T16 Pro Heat Upright Wet/Dry Vacuum Cleaner

The Dreame T16 Pro Heat represents a new generation of cordless wet-and-dry vacuums designed for fast and thorough cleaning of hard floors. In a single pass, it vacuums up dry dirt, picks up spilled liquids, and mops the floor, using advanced sensors, hot water, and high suction power. The combination of 30,000 Pa of suction power, the ThermoRinse™ system with hot water up to 90 °C, and the intelligent AutoAdapt™ system enables effective removal of even stubborn and greasy stains.

Floor cleaning with fresh hot water up to 90 °C

The ThermoRinse™ system uses fresh hot water at temperatures up to 90 °C during cleaning. The high temperature helps break down greasy stains, food residue, sauces, and other stubborn dirt that is harder to remove with cold water. The brush is continuously rinsed with clean water during operation, while powerful suction immediately draws the dirty water and debris into a separate container.

This prevents dirt from spreading across the floor; instead, it is removed as it is cleaned. This is particularly useful in the kitchen, dining room, and other areas where grease stains or spilled liquids are common.

30,000 Pa for wet and dry debris

A powerful suction system with up to 30,000 Pa picks up dust, crumbs, hair, larger particles, and liquids. The T16 Pro Heat thus allows for simultaneous vacuuming and mopping and can replace several separate steps of traditional cleaning.

You can also use the vacuum to pick up larger amounts of liquid without adding extra water to the floor, which is convenient for spills or very wet surfaces.

WhaleSweep™ AI for Cleaning Along Edges and in Corners

One of the key features of the T16 Pro Heat is the WhaleSweep™ AI Robotic Arm system. This intelligent mechanism tracks the vacuum cleaner’s movement and can automatically adjust the cleaning direction.

When moving backward, it helps remove wet and dry debris and reduces the amount of water left on the surface after cleaning. The system is also designed for more precise cleaning right up against walls, furniture, and in corners, where conventional wet-dry cylinder vacuums often leave a few centimeters of uncleaned space.

Additional scrapers help remove residual liquid from the floor, leaving fewer water marks on the surface after cleaning.

180° tilt for cleaning under furniture

Despite its high performance, the T16 Pro Heat features an exceptionally low-profile design. During use, you can position the vacuum cleaner almost completely horizontally—up to 180°—requiring only about 9.85 cm of clearance.

This allows you to easily clean under beds, sofas, cabinets, and other low-profile furniture. Suction power remains fully effective even when cleaning in this position.

GlideWheel™ for Easier Maneuvering

Dreame has equipped this model with the GlideWheel™ system, which uses rear drive wheels to make it easier to move the device forward and backward. The system detects the direction of movement and assists in maneuvering the vacuum cleaner, so the user does not have to move the entire weight of the device using only their arm strength.

This is particularly noticeable during extended cleaning sessions on larger surfaces, where the vacuum remains easy to maneuver despite weighing approximately 6.2 kg.

AutoAdapt™ automatically adjusts cleaning

Advanced multispectral sensors monitor floor conditions and detect different types of dirt. The AutoAdapt™ system can adjust suction power, water volume, and detergent usage based on the detected level of dirt.

This means the user doesn’t have to constantly change the settings. On less soiled surfaces, the device uses less energy and water, while for tougher stains, it automatically increases the cleaning intensity.

The Smart, Hot Water, Turbo, and Custom modes are available for different needs, and additional settings can also be customized via the Dreamehome app.

Automatic brush cleaning at 95 °C

Once cleaning is complete, place the T16 Pro Heat on the charging station to start the automatic cleaning cycle. The system uses hot water at temperatures up to 95 °C to help remove dirt and debris from the roller brush.

During the process, the brush rotates in both directions, and water flows through the bristles while the suction system drains the dirty water into the waste water tank. This way, you don’t have to wash the roller by hand after every cleaning session.

Hot-air drying at 95 °C

After the automatic wash cycle, the drying cycle begins. Hot air at temperatures up to 95 °C flows through the brush, hoses, and filter, helping to remove any remaining moisture.

Thorough drying reduces the risk of unpleasant odors, the growth of microorganisms, and prolonged moisture retention in the brush. This ensures the device is ready for the next cleaning cycle without a wet or malodorous roller.

Up to 70 minutes of runtime

A large removable battery with a 6 × 5,000 mAh configuration allows for up to 70 minutes of cleaning in Eco mode. In hot-water cleaning mode, the maximum runtime is approximately 22 minutes.

According to the manufacturer , under optimal conditions , the device can clean an area of up to approximately 500 m² on a single charge . The battery charging time is approximately four hours.

The battery pack is removable. For larger areas, you can purchase an additional battery and swap out the empty one for a full one, thereby extending the operating time even further.

Large Tanks and Automatic Detergent Dispensing

The T16 Pro Heat features a 900-milliliter clean water tank and a 500-milliliter dirty water tank, reducing the need for frequent refilling and emptying during cleaning.

It also features a built-in 150-milliliter detergent tank. The device can adjust the amount of detergent based on cleaning needs, so the user doesn’t have to manually add detergent to the water with every cleaning session.

Smart Features and a Clear Overview of Operation

The color LED display allows you to monitor the cleaning mode, battery status, and other important information. Voice prompts alert the user to the device’s status, a full dirty water tank, or the need for maintenance.

Specifications