Gramofon REGA PLANAR 1 PLUS bijeli

Gramofon REGA PLANAR 1 PLUS bijeli

Šifra artikla: REGA_PLANAR1_PLUS
WEBSHOP     Raspoloživo odmah
ZG Velesajam     Raspoloživo odmah
ČK Galerija sjever     Raspoloživo uz narudžbu
*informacija o raspoloživosti je promjenjiva i ne predstavlja obvezujuću ponudu
Dostava je besplatna
Cijena: 2.889,00 Kn

Platite do 12 rata bez kamata već od 240,75 Kn / mjesečno
Jamstvo: 24 mj.
Količina:

Opis artikla

Gramofon s ugrađenim Fono Mini gramofonskim pretpojačalom za spajanje na pojačala bez dediciranog “Phono” ulaza. RB110 ručka. Rega Carbon moving magnet zvučnica. 24v sinkroni AC motor.
Gramofon s ugrađenim Fono Mini gramofonskim pretpojačalom za spajanje na pojačala bez dediciranog “Phono” ulaza. RB110 ručka. Rega Carbon moving magnet zvučnica. 24v sinkroni AC motor.

Specifikacije(en)

Built-in Phono Stage
The built-in phono stage is a high specification pre-amplifier. It is designed to amplify the signal from a moving magnet cartridge to a suitable level for all line level inputs of an appropriate system or audio amplifier. This allows simple connection to a wide variety of products using either the standard twin phono to phono lead (supplied) or phono to 3.5 mm plug (not supplied).

Tonearm
Brand new RB110 tonearm built with the new Rega designed, bespoke, zero play bearings with ultra-low friction performance (Patent Pending). New bias assembly and integrated arm clip. Includes automatic bias adjustment negating the need for the user to set bias, making this the most ‘Plug & Play’ turntable we have ever manufactured. New ergonomically, re-designed and stiffer headshell for improved usability and appearance.

Cartridge
Rega Carbon moving magnet cartridge supplied fitted as standard.

Motor
24v, synchronous AC motor with a new motor PCB and aluminium pulley offering low noise and better speed stability.

Plinth
Brand new Thermoset, gloss laminated plinth with vastly improved appearance and new ergonomically positioned on/off switch located on the underside. Two stunning plinth finishes available, gloss black and gloss white.

Central Bearing housing
Re-designed brass main bearing, offering improved fit and removing stress on the bearing itself while minimising the transfer of potential energy. (Patent pending)

Platter
23mm, high mass, phenolic platter with improved flywheel effect for improved speed stability.

Re-Designed feet
New improved feet to increase stability and reduce vibration transfer.

Motor cover tray
New motor cover tray with integrated cooling.

Balance Weight
New 111g ‘Plug and Play’ balance weight.

Use only with a Rega PS1 350 mA power supply.

Tech specs
50 Hz: 24 V AC 0.142 mA maximum power consumption 3.4 W.
60 Hz: 24 V AC 0.129 mA maximum power consumption 3.1 W.

Maximum Output Level (3.54 cm/s RMS 45 degrees CBS STR100 Band 6a and 7a): 370-410 mV

Output Impedance: 1 k?

Frequency Response (pre-amplifier only): 14 Hz (-3 dB Point) to 100 kHz (-0.6 dB Point)

RIAA Accuracy (pre-amplifier only): (100 Hz to 20 kHz) ± 0.4 dB typically better than ± 0.25 dB

Pre-amplifier Gain: 40 dB

Pre-amplifier Input Loading: 47 k? in parallel with 220 pF
Signal to Noise Ratio: -75 dB A-weighted ref maximum output.
Power Requirements: 50 Hz 24 V AC 0.142 mA 3.4 W – 60 Hz 24 V AC 0.129 mA 3.1 W

Dimensions (lid closed) H 11.7 x W 44.7 x D 36 cm

Weight 4.35kg

Više o proizvodu pročitajte ovdje.

Brzi linkovi

© 1997-2019 Ronis d.o.o. Sva prava pridržana
Back to top