7x120w (rms 8ohm)surround receiver,5 way HDMI switching incorporatingHDMI 1.3 and video up scaling to 1080p. Decodes Dolby Digital, Dolby True HD,DTS and DTS Master.RDS AM/FM tuner with 50 presets. Network enabled inc internet radio and IP control RS 232 .DolbyVolume . Suport for iPod via rLead or rDock.The Arcam AVR600 is a 7.1ch, high definition home cinema receiver featuring 5 HDMI inputs and 2 outputs (ideal for both a flatscreen projector) supporting 1080p resolutions and the 24 frames per second native film format, HD Audio decoding, DAB/FM tuners, Internet radio, media playback over a network or from USB devices, multi-room capabilities and auto microphone setup and calibration. A stunning AV hub.
Specifikacije
Analogue Audio
120WPC continuous power output into 4 or 8 ohms loads (all 7 channels driven at 1kHz)
Stereo output power over 150WPC into 4 or 8 ohms, 20Hz to 20kHz
Huge toroidal power transformer and high efficiency class G amplifier ensures ample power for even the most demanding programme material
In 5.1 speaker setups channels 6 7 assignable to bi-amplify front left and right or for use in Zone 2
Audiophile quality components for best sound quality
Multi-channel 7.1 analogue input for DVD-A or SACD sources
Stereo direct mode bypasses and disables all digital processing for 2 channel analogue sources
9 stereo analogue inputs (including one MM phono input front 3.5mm AUX input)
Zone 2 stereo audio, from analogue inputs (Source and volume control independent from main zone)
Zone 3 stereo audio, from analogue inputs
Linked to Zone 2, volume control independent
DAB/FM/AM or FM/AM stereo tuner with 50 presets
Sirius Home Connect compatible input
Support for iPod via Arcam rLead / rDock (independent of RS232 connection)
Digital Audio
State of the art Analog Devices ADSP-21366 ADSP-21367 DSPs for surround decoding
Crystal Semiconductor 24bit 192kHz DACs, stereo ADC and precision electronic volume controls
Dolby TrueHD, Dolby Digital+, Dolby Digital EX, Dolby Pro Logic IIx, DTS HD Master
Audio, DTS High Resolution Audio, DTS-ES Discrete, DTS-ES Matrix, DTS96/24, DTS Neo 6
Dolby Volume processing for balancing of program material gain and tonal balance
Adjustable crossover switching 40Hz, 60Hz, 80Hz, 100Hz, 120Hz, 150Hz
8 digital inputs 4 rear optical, 3 co-axial, 1 front 3.5mm optical AUX input
Global audio delay, adjustable from 0-1000 milliseconds, to compensate for video processing delays in digital displays and sources
USB input for audio file playback from UPnP mass storage devices
Ethernet connection for Internet Radio and audio streaming
Video
5 HDMI inputs (up to 1080p, Deep Colour)
2 HDMI outputs (up to 1080p, Deep Colour)
5 Component inputs, one monitor output (up to 1080i)
5 S-video inputs, one monitor output, 2 tape outputs
5 Composite video inputs, one monitor output, 2 tape outputs
Full video up/down conversion frame rate conversion of all inputs where technically allowed
Video enhancements Edge enhancement, Mosquito noise reduction, Random noise reduction, Block noise reduction
Custom Install Features
Independent Zone 2 (audio video), with fixed/variable volume
Zone 3 audio with fixed/variable volume
RC-5 remote input jacks for all three zones
IR pass through for source components
Full suite of discrete IR RC-5 codes, including separate on / off etc
12Volt triggers, on / off for zones 1, 2 and 3
Full duplex RS232 control input for more complex control systems
Ethernet connection for IP control
General
Supplied with back-lit CR102 learning remote
control with support for up to 7 other
components and a huge on-board code
library
Large, high contrast dimmable VFD front
panel display
User switchable between 120 230Volt
mains supplies
Size ndash; 435mm (17.1in) wide, 435mm (17.1in)
deep, 185mm (7.3in) high
Weight 25kg nett, 30kg packed
Klikinte za detaljan opis
